Committed to the chemical machinery manufacturing,
providing for the production of materials, kneading equipment

National Service:13962726811


Rugao Gaopu kneading Machinery Manufacturing Co., Ltd

phone: 0513-87653150

Mobile phone: 13962726811

fax: 0513-87305150


address: Jiangsu Rugao Red Star Industrial Park on the 8th Road

current location:Home » news
Test whether the normal factor kneading machine
The author:admin 来源:High Pu kneading machinery   date: 2017/5/9 Popularity:101

1, kneading machine after the initial installation must first clean up the machine, remove the stains and wipe rust-proof grease.

2, in the first start before the kneading machine must check the degree of tension of the belt, through the adjustment of the screw to the motor to the appropriate location.

3, must also check the kneading machine fasteners have no loosening of the phenomenon, there is no leakage of steam pipes, circuits and electrical equipment is safe.

4, kneading machine in the test before the kneading room clean, for 10-15 minutes of air running, to confirm the normal operation of the machine and then put into production. Usually the new machine gear (including reducer) early use of noise, to be a period of time to naturally reduce.

5, the use of steam heating kneading machine, into the pipeline should be equipped with safety valve and pressure gauge, the steam pressure shall not exceed the knowledge of the mixing tank cylinder pressure requirements.

6, mixing pulp should be reduced when the use of reverse; wall seal should not have the phenomenon of raw material leakage.

Keywords: kneading machine, stainless steel kneading machine

Mobile phone